 |
 |
 |
The smoothing plant UO on chassis KrAZ-65101 (KrAZ-65053) is intended for treatment of grouting mortar during its preparation in order to provide the parameters homogeneity of the mixture in whole volume. The plant is used for all kinds of grouting works on the boreholes. The plant construction allows to use it for preparation of buffer mix and for stopper liquids.
|
|
"TRUCKS AND SPECIAL EQUIPMENT"
SMOOTHING PLANT UO
For scanning the large image of the automobile KrAZ press on a photo.
|
SMOOTHING PLANT UO |
|
Technical Data |
|
Chassis - KrAZ-65101 (KrAZ-65053) |
|
Wheel arrangement |
6x4 |
|
Engine |
YMZ-238M2 (YMZ-238B) |
|
Turbo-charge - no (yes) |
|
Power, kW/h.p. at 2100 (2000) min-1
|
176/240 (220/300) |
|
Maximum torque, N*m/kgf*m at 1250-1450 (1200-1400) min-1
|
883/90 (1180/120) |
|
Tyres |
12.00R20 (320R-508) |
|
Equipped plant mass, kg |
13420 (13720) |
|
Limiting reservoir capacity, m3
|
16 |
|
The greatest density of flattening mortar, g/cm3
|
2,5 |
|
Permissible difference of the mortar density, g/cm3
|
0,01 |
|
Maximum feed of initial grouting mortar into the plant, cm3/s |
44 |
|
Volume of the mortar portion, m3
|
5...15 |
|
Shafts drive with screw blades -through the power take off case, cardan shafts and chain gear |
|
Dimensions in transport position, mm |
9650x2500x3360 |
|
Maximum speed, km/h |
80 |
Reclame
|
|
 |
|
 |
