 |
 |
 |
The plant UBC-20 on chassis RrAZ-65101 (KrAZ-65053) is intended for drilling by rotor method with straight and back irrigation of the boreholes on water, for repair and hydrology explorations as well as for geophysical and reconnaissance boreholes for gas and petroleum.
|
|
"TRUCKS AND SPECIAL EQUIPMENT"
SELF-PROPELLED AUGER PLANT UBC-20
For scanning the large image of the automobile KrAZ press on a photo.
|
SELF-PROPELLED AUGER PLANT UBC-20 |
|
Technical Data |
|
Chassis - KrAZ-65101 (KrAZ-65053) |
|
Wheel arrangement |
6x4 |
|
Engine |
YMZ-238M2 (YMZ-238B) |
|
Turbo-charge - no (yes) |
|
Power, kW/h.p. at 2100 (2000) min-1
|
176/240 (220/300) |
|
Maximum torque, N*m/kgf*m at 1250-1450 (1200-1400) min-1
|
883/90 (1180/120) |
|
Tyres |
12.00R20 (320R-508) |
|
Full mass in transport position, kg |
26500 (26800) |
|
Diameter of the boreholes, mm |
|
with straight irrigation of the borehole |
|
- initial |
394 |
|
- final |
190 |
|
with back irrigation of the borehole (maximum) |
1270 |
|
Depth of drilling, m |
24 |
|
with straight irrigation of the borehole |
1000 |
|
with back irrigation of the borehole |
300 |
|
Load capacity of the swivel, Tf |
20 |
|
Maximum torque of the rotor, kg*m |
800 |
|
Rotor rotational speed, min-1
|
0...240 |
|
Diameter of the rotor passing hole, mm |
415 |
|
Length of the mast, mm |
18,2 |
|
Dimensions in transport position, mm |
10900x2900x3800 |
|
Maximum speed, km/h |
80 |
Reclame
|
|
 |
|
 |
